The Wyze doorbell is easy to set up and install. The materials that come in the box when you buy the device will be sufficient for this. All the materials you need, such as Wyze chime, wall plate, screws, extension cable and fuse wire, come with the box.
One thing you should pay attention to when installing is for your safety: first cut off the electricity to the doorbell, you will turn it on again after the installation. Open the ringer box, download the Wyze app and open it. When you enter the application, go to the cable configuration section. Wyze video doorbell pro works with wireless connection. This device, which is a newer and higher model, is very good in terms of design and features.
- Connect one of the cables to the fuse cable
- Connect it to the other electrical circuit cable.
After completing each process, continue the installation by clicking Proceed through the Wyze app. Tighten your doorbell by placing it on the wall plate vertically or horizontally with the help of screws. That’s it for installing the doorbell. If the yellow light on the device is flashing, it means you did everything right. If it is not on, you probably connected the cables incorrectly and you need to fix it.
Before Installing
After Setup
Important notes, FAQ and Troubleshooting, for Wyze Video Doorbell
Wyze Video Doorbell Features: The device has night vision and provides a very clear image. When you use the Wyze app, you can receive instant notifications from the device. Wyze Chime comes with nearly 20 different sound types. You can adjust which melody you choose through the application. Since the device will be kept outside, it is manufactured with water resistance feature. In Wyze video doorbell pro the device has a battery and wireless connection is possible.
Note: During Wyze chime installation, the blue light flashes 3 times on the device.
Wyze Doorbell PRO: Its difference from the classic doorbell is that it is wireless. You don’t need to deal with cables. It contains an internal battery. You can use it by sticking it directly to the wall.
You do not need an internet connection to use Wyze video doorbell.
Wyze doorbell SD card: Memory cards are not used in the devices. A cloud system is available to record all videos.
Wyze error code 90: Check your device’s internet connection or power cable.
Wyze error code 20, 06 etc. may give many errors. The first thing you need to do is turn the device on and off. Then delete the wyze application and reinstall it. Then check the software update and upgrade to the latest firmware version if necessary. As a last resort, reset the device.
These are the steps to be taken for all problems. The last resort, the reset process, will be done by pressing and holding the reset button on the back of the device for a few seconds. You will now need to reinstall the device that has returned to factory settings.
Just trying to see on my phone the person that rang the bell.
New device never heard of this brand.